NSN 5306-01-124-5777 · NIIN 011245777 · FSC 5306
NO DASHES 5306011245777
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.589 AND INCHES MAXIMUM 0.639 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.849 AND INCHES MAXIMUM 2.879 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.263 AND INCHES MAXIMUM 0.303 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.691 AND INCHES MAXIMUM 0.701 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.044 AND INCHES MAXIMUM 0.064 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.423 AND INCHES MAXIMUM 0.438 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.240 AND INCHES MAXIMUM 2.260 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.626 AND INCHES MAXIMUM 2.666 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |