NSN 5305-01-697-5209 · NIIN 016975209 · FSC 5305
NO DASHES 5305016975209
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F-16
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F-16 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2641 AND INCHES MAXIMUM 0.2651 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG REDUCED HEAD,TORQ-SET OR HEX RECESS,132 KSI MIN SHEAR |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S-6487 |
| AAJD | THREAD CLASS | 3A |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81755-C7985 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.9505 AND INCHES MAXIMUM 0.9805 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.399 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE TREATMENT RESPONSE NAS672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.403 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.5625 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |