NSN 3110-01-216-1417 · NIIN 012161417 · FSC 3110
NO DASHES 3110012161417
In Stock
BEARING,BALL,AIRFRAME
Bearings, Antifriction, Unmounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES NOMINAL 2.0630 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 3.0000 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.3750 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.4370 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZC | LOAD DIRECTION | RADIAL |
| AHAW | SELF-ALIGNMENT LOCATION | EXTERNAL |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0003 AND INCHES MAXIMUM RADIAL 0.0010 |
| CBBL | FEATURES PROVIDED | ALIGNING RING AND EXTRA LIGHT DUTY SERIES |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS |
| FEAT | SPECIAL FEATURES | 40 T0 60 PCT FULL OF SPECIFIED LUBRICANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | SEAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| MATT | MATERIAL | ALIGNMENT RING STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ALIGNMENT RING ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SFTT | SURFACE TREATMENT | INNER RING CHROMIUM |
| SFTT | SURFACE TREATMENT | ALIGNMENT RING CADMIUM |
| SFTT | SURFACE TREATMENT | OUTER RING CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALIGNMENT RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING MFR REF SINGLE TREATMENT RESPONSE FAFKOTE TDC,-S-330,FSC- 21335 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING MFR REF SINGLE TREATMENT RESPONSE FKOTE TDC,-S-330,FSC- 21335 |
| STYL | STYLE DESIGNATOR |