NSN 5962-01-078-1814 · NIIN 010781814 · FSC 5962
NO DASHES 5962010781814
In Stock
MICROCIRCUIT,MEMORY
Microcircuits, Electronic
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.795 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.300 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.195 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 512.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND SCHOTTKY AND 3-STATE OUTPUT AND W/DECODED OUTPUT AND PROGRAMMABLE AND PROGRAMMED AND W/ENABLE AND W/DISABLE |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 6 INPUT |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL -0-001-AG |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 5.5 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 30.00 AND NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT 30.00 |
| CZER | MEMORY DEVICE TYPE | ROM |
| CZZZ | MEMORY CAPACITY | UNKNOWN |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 26916-058-002131 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 16 |