NSN 5307-01-200-1495 · NIIN 012001495 · FSC 5307
NO DASHES 5307012001495
In Stock
STUD,PLAIN
Studs
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.2930 TO 0.2945 |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.625 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.844 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.678 AND INCHES MAXIMUM 1.698 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES NOMINAL 0.110 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.072 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.312 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.312 |
| CSYM | SURFACE FINISH | NUT THD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | STUD THD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | SHANK MICROINCHES 63.0 |
| MATT | MATERIAL | STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2400 |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNS |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |