NSN 5306-00-286-0926 · NIIN 002860926 · FSC 5306
NO DASHES 5306002860926
In Stock
BOLT,CLEVIS
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.281 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.656 |
| AASK | HEAD STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW BOLT SHANK DIA |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.531 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 1060 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.038 |
| AAVZ | GROOVE DIAMETER | INCHES NOMINAL 0.100 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.078 |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.312 |
Supersedes
This item replaces cancelled NIIN 002825429. An older drawing citing one of those numbers resolves here.