NSN 5315-00-812-3757 · NIIN 008123757 · FSC 5315
NO DASHES 5315008123757
In Stock
PIN,STRAIGHT,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 0.772 AND INCHES MAXIMUM 0.792 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| STYL | STYLE DESIGNATOR | |
| CQSX | SHEAR STRENGTH | DOUBLE POUND 1840 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.5 AND ROCKWELL C MAXIMUM 32.0 |
| CQPJ | PIN CHAMFER ANGLE | DEGREES MINIMUM 14.5 AND DEGREES MAXIMUM 15.5 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.124 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| FEAT | SPECIAL FEATURES | THE SHANK END OF PIN MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTIONAL OF THE VENDOR |
| HGTH | HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.062 |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 6300 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6050 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.091 |
| AASK | HEAD STYLE | |
| AAZP | CHAMFER LENGTH | INCHES MAXIMUM 0.062 |
Supersedes
This item replaces cancelled NIINs 002351152 · 007276306. An older drawing citing one of those numbers resolves here.