NSN 5306-00-150-9854 · NIIN 001509854 · FSC 5306
NO DASHES 5306001509854
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.453 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.141 AND INCHES MAXIMUM 2.188 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.377 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.734 AND INCHES MAXIMUM 1.766 |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 62000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.000 AND INCHES MAXIMUM 2.031 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-430 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE FILM AND ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-C-5541 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-A-8625 |
| THSD | THREAD SERIES DESIGNATOR | UNF |