NSN 5305-00-939-9256 · NIIN 009399256 · FSC 5305
NO DASHES 5305009399256
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.113 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| ASXK | HOLE QUANTITY | 1 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.438 AND INCHES MAXIMUM 1.500 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.500 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| ABQZ | INTERNAL DRIVE STYLE |
Supersedes
This item replaces cancelled NIINs 000586891 · 006382494. An older drawing citing one of those numbers resolves here.