ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5340-00-827-4417
NSN 5340-00-827-4417  ·  NIIN 008274417  ·  FSC 5340
NO DASHES 5340008274417
In Stock

BRACKET,ANGLE

Hardware, Commercial

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONFED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,ALCLAD T3
AHLNSECOND LEG HOLE DIAMETERINCHES MINIMUM 0.118 AND INCHES MAXIMUM 0.138
AHLSSECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTHINCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385
ADLKFIRST LEG LENGTHINCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635
AKCUSECOND LEG HOLE ARRANGEMENT STYLE
AHPWFIRST LEG THICKNESSINCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073
AHLKFIRST LEG HOLE DIAMETERINCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.214
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLEDEGREES NOMINAL 90.0
MATTMATERIALALUMINUM ALLOY 2024
AJFPFIRST LEG END RADIUSINCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTHINCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260
STYLSTYLE DESIGNATOR
AKBUSECOND LEG STYLE
AJZUFIRST LEG STYLE
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTHINCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260
ADLLSECOND LEG LENGTHINCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010
AHLFSECOND LEG WIDTHINCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510
AKAUFIRST LEG HOLE ARRANGEMENT STYLE
AHPXSECOND LEG THICKNESSINCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073
AHQNFIRST LEG WIDTHINCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510
AJFQSECOND LEG END RADIUSINCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260