NSN 5905-00-998-9038 · NIIN 009989038 · FSC 5905
NO DASHES 5905009989038
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 60.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.093 AND INCHES MAXIMUM 1.187 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 320.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.453 AND INCHES MAXIMUM 0.485 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 78626-30343 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.343 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MAXIMUM 0.266 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |