NSN 4720-00-405-7299 · NIIN 004057299 · FSC 4720
NO DASHES 4720004057299
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.797 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS AND SELF-SEALING |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 5000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.875 |
| FEAT | SPECIAL FEATURES | SLEEVE,BULLET SEALING RUBBER COVERED WITH A RUBBER IMPREGNATED FIBER WRAP AND TWO CRES CLAMPS;1.859 IN. O/A OD |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 29.000 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.562 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 97499-70-032 |
| CRSM | VACUUM IN TORR | 76.2 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2500.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| ADJS | EXTERIOR COLOR | BLACK |
Supersedes
This item replaces cancelled NIIN 015982654. An older drawing citing one of those numbers resolves here.