NSN 4720-00-913-1185 · NIIN 009131185 · FSC 4720
NO DASHES 4720009131185
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL EXCLUDING END FITTINGS 14.250 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.312 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 225.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.750 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 12.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY LAID STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.750 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 4000.0 |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | SECOND END THREADED EXTERNAL PIPE |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N OR CHLOROPRENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| THSD | THREAD SERIES DESIGNATOR | SECOND END NPTF |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, BUNA-N |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM |
Supersedes
This item replaces cancelled NIIN 006097134. An older drawing citing one of those numbers resolves here.