NSN 5340-01-660-5847 · NIIN 016605847 · FSC 5340
NO DASHES 5340016605847
In Stock
CLAMP,LOOP
Hardware, Commercial
Application: 1450-01-645-2211
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.228 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.040 |
| AGAV | END ITEM IDENTIFICATION | 1450-01-645-2211 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 81343-SAE AS21919 |
| STYL | STYLE DESIGNATOR | |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AJRB | MATERIAL DIAMETER | INCHES NOMINAL 0.040 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 2.523 AND INCHES MAXIMUM 2.553 |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S5510 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 2.757 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 4.110 AND INCHES MAXIMUM 4.140 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP,LOOP TYPE,CUSHIONED SUPPORT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S3209 |
| ABJH | TEMP RATING | FAHRENHEIT 212.0 |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | OZONE RESISTANT |
Supersedes
This item replaces cancelled NIIN 016477441. An older drawing citing one of those numbers resolves here.