NSN 5340-00-579-6364 · NIIN 005796364 · FSC 5340
NO DASHES 5340005796364
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 4 AND CLASS B |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.015 AND INCHES MAXIMUM 1.045 |
| MATT | MATERIAL | BAND STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 1 CL 2 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.110 AND INCHES MAXIMUM 1.140 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.248 |
Supersedes
This item replaces cancelled NIIN 005140019. An older drawing citing one of those numbers resolves here.