NSN 4720-00-898-6592 · NIIN 008986592 · FSC 4720
NO DASHES 4720008986592
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKXL | END FITTING COMPONENT AND MATERIAL | SECOND END NIPPLE STEEL |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AHNC | CONNECTION STYLE | |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.094 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.750 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 12.0 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE PASSIVATE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.688 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SECOND END SOCKET CADMIUM |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT (UNJ) |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE AS604,SIZE 12-81343 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 81343-AS622 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 25.125 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER RUBBER IMPREGNATED WOVEN FABRIC |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.062 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT CADMIUM |
Supersedes
This item replaces cancelled NIIN 004514464. An older drawing citing one of those numbers resolves here.