NSN 3110-00-542-1541 · NIIN 005421541 · FSC 3110
NO DASHES 3110005421541
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| CTHQ | BEARING PRELOAD RATING | POUNDS NOMINAL 100.0 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 7.1240 AND INCHES MAXIMUM 7.1250 |
| AGYE | SURFACE FINISH | GROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE 66 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.2300 AND INCHES MAXIMUM 1.2500 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 5.9990 AND INCHES MAXIMUM 6.0000 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | LUBRICATION GREASE |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0001 AND INCHES MAXIMUM RADIAL 0.0007 |