NSN 5990-00-458-3113 · NIIN 004583113 · FSC 5990
NO DASHES 5990004583113
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 566.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 425.00 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.0900 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0460 AND INCHES MAXIMUM 0.0470 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 393.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0610 AND INCHES MAXIMUM 0.0630 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 25.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 4114.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 2107.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 889.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 320.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6820 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 30.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | MILLIMETER-MILLIGRAMS NOMINAL 5400.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 630.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES MINIMUM 0.1250 AND INCHES MAXIMUM 0.1265 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.5920 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 757.00 |