NSN 5990-00-796-1728 · NIIN 007961728 · FSC 5990
NO DASHES 5990007961728
In Stock
RESOLVER,ELECTRICAL,LINEAR
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.2380 AND INCHES MAXIMUM 1.2440 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.4280 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9370 AND INCHES MAXIMUM 0.9470 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AAQL | BODY STYLE | |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0350 AND INCHES MAXIMUM 0.0410 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0600 AND INCHES MAXIMUM 0.0660 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0781 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1750 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0005 AND INCHES MAXIMUM 0.0015 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0770 AND INCHES MAXIMUM 0.0780 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0800 AND INCHES MAXIMUM 0.0810 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1870 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 10 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8350 AND INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |