NSN 5990-00-851-9930 · NIIN 008519930 · FSC 5990
NO DASHES 5990008519930
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 135.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 240.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 67.60 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 14.40 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 88.70 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 12.40 |
| AJSL | BODY SIZE | 11 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.6200 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 423.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1750 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4320 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AAQL | BODY STYLE | |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 50.50 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0900 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 74.00 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1090 AND INCHES MAXIMUM 0.1100 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4370 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 41.60 |