NSN 5990-00-760-7474 · NIIN 007607474 · FSC 5990
NO DASHES 5990007607474
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 18.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.6000 AND INCHES MAXIMUM 1.6620 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3125 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.2250 AND INCHES MAXIMUM 2.2870 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| ABWV | SHAFT DIAMETER | BOTH SHAFTS INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | BOTH SHAFTS INCHES MINIMUM 0.2500 AND INCHES MAXIMUM 0.3750 |
| AJSL | BODY SIZE | 15 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 4.70 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | NOMINAL 19.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 12.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 1.4 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 18.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 112.00 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4380 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1310 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 250.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | BOTH SHAFTS INCHES MINIMUM 0.0300 AND INCHES MAXIMUM 0.0350 |
| CRHN | SHAFT SLOT WIDTH | BOTH SHAFTS INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8720 AND INCHES MAXIMUM 0.8780 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |