NSN 5990-00-553-6711 · NIIN 005536711 · FSC 5990
NO DASHES 5990005536711
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
49 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTE | ZSO-90 RESISTANCE IN OHMS | NOMINAL 90.00 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 65.0 |
| AJSL | BODY SIZE | 23 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2660 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 494.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 311.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 79.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AAZX | SECOND SHOULDER LENGTH | INCHES MINIMUM 0.1670 AND INCHES MAXIMUM 0.1700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.2940 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | NOMINAL 90.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 210.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 5.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 132.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 98.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 249.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES NOMINAL 0.130 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0360 AND INCHES MAXIMUM 0.0460 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.4450 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 7 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 94 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.2410 AND INCHES MAXIMUM 0.2520 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2402 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6930 AND INCHES MAXIMUM 0.7190 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2500 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9900 AND INCHES MAXIMUM 1.9950 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 75.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 125.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |