NSN 5990-00-539-7329 · NIIN 005397329 · FSC 5990
NO DASHES 5990005397329
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.1720 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 22 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.9970 AND INCHES MAXIMUM 2.0030 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.1000 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1980 AND INCHES MAXIMUM 0.2020 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1845 AND INCHES MAXIMUM 0.1850 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES NOMINAL 0.5000 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 900.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 5.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 0.60 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 0.26 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 45.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0600 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 2.6120 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9990 AND INCHES MAXIMUM 1.9995 |
| CQZS | SHAFT SLOT DEPTH | FRONT SHAFT INCHES NOMINAL 0.0470 |
| CRHN | SHAFT SLOT WIDTH | FRONT SHAFT INCHES NOMINAL 0.0320 |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND, SLOTTED |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 50.000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.1600 AND INCHES MAXIMUM 2.1610 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.1230 AND INCHES MAXIMUM 0.1270 |