NSN 3010-00-919-6539 · NIIN 009196539 · FSC 3010
NO DASHES 3010009196539
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | FIRST END ANGLED TO ARMATURE/ROTOR AXIS |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | IDENTICAL ENDS DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | IDENTICAL ENDS FIRST STYLE A5 AND SECOND STYLE A9 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 220.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | IDENTICAL ENDS SINGLE REVOLUTIONS PER MINUTE 43.000 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.450 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS RUNNING 44.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 3.376 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | WINDING TYPE IS POLYPHASE |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0666 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.124 |
| AFYS | KEYWAY LENGTH | IDENTICAL ENDS INCHES NOMINAL 1.125 |
| ANPZ | ENCLOSURE FEATURE | OPEN |
| AXGY | MOUNTING METHOD | FACE |
| AAJT | OVERALL HEIGHT | INCHES 5.453 |
| AAJU | OVERALL LENGTH | INCHES 9.062 |
| AAJV | OVERALL WIDTH | INCHES 6.592 |
| ABRR | KEYWAY WIDTH | IDENTICAL ENDS INCHES NOMINAL 0.188 |
| ABRV | KEYWAY DEPTH | IDENTICAL ENDS INCHES NOMINAL 0.094 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES MINIMUM 0.624 AND INCHES MAXIMUM 0.625 |
| ABXQ | FLATTED PORTION LENGTH | IDENTICAL ENDS INCHES NOMINAL 1.388 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWCS | LENGTH OF SHAFT FROM HOUSING | IDENTICAL ENDS INCHES 1.500 |
| AGRB | FLAT DEPTH | IDENTICAL ENDS INCHES NOMINAL 0.032 |
| AKCT | SHAFT ROTATION DIRECTION | IDENTICAL ENDS CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 |
| BFMF | COOLING METHOD | FAN COOLED |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 1.562 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SECOND END ANGLED TO ARMATURE/ROTOR AXIS |