NSN 5990-00-922-4896 · NIIN 009224896 · FSC 5990
NO DASHES 5990009224896
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 224.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 27.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.454 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 36.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.7820 AND INCHES MAXIMUM 1.8580 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.2910 AND INCHES MAXIMUM 1.3430 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 130.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 540.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 37.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 9.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4910 AND INCHES MAXIMUM 0.5150 |