NSN 3110-00-726-3244 · NIIN 007263244 · FSC 3110
NO DASHES 3110007263244
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYW | BEARING SEAL TYPE | CONTACT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| MATT | MATERIAL | BALL STEEL |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.5000 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 2.0310 |
| AGYJ | SEAL QUANTITY | 2 |
| MATT | MATERIAL | SHAFT STEEL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.4070 |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.3120 |
| AAZF | SHANK STYLE | |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.9690 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.5160 |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3740 |
| AAJD | THREAD CLASS | 3A |
| STYL | STYLE DESIGNATOR |