NSN 5320-00-395-6421 · NIIN 003956421 · FSC 5320
NO DASHES 5320003956421
In Stock
PIN-RIVET
Rivets
Application: W/S: AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); AIRCRAFT, STRATOLIFTER C-135; JOINT STARS TARGET RADAR SYSTEM; AIRCRAFT, PHANTOM F-4; HELICOPTER, CHINOOK CH-47; AIRCRAFT, GALAXY C-5; AIRCRAFT MH-47E; AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.877 AND INCHES MAXIMUM 0.897 |
| AASK | HEAD STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.2172 AND INCHES MAXIMUM 0.2182 |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.315 |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED CETYL ALCOHOL |
| AGAV | END ITEM IDENTIFICATION | W/S: AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); AIRCRAFT, STRATOLIFTER C-135; JOINT STARS TARGET RADAR SYSTEM; AIRCRAFT, PHANTOM F-4; HELICOPTER, CHINOOK CH-47; AIRCRAFT, GALAXY C-5; AIRCRAFT MH-47E; AIRCRAFT, THUNDERBOLT II, A-10 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 0.567 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6049 |
| AAZF | SHANK STYLE | |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.079 AND INCHES MAXIMUM 0.081 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |