NSN 5306-01-505-1604 · NIIN 015051604 · FSC 5306
NO DASHES 5306015051604
In Stock
BOLT,SHEAR
Bolts
Application: KC-135
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.541 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.766 AND INCHES MAXIMUM 2.796 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.265 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.514 AND INCHES MAXIMUM 0.515 |
| AGAV | END ITEM IDENTIFICATION | KC-135 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.240 AND INCHES MAXIMUM 2.260 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S6415 OR ASSN STD 1ST MATERIAL RESPONSE A-S6484 OR ASSN STD 1ST MATERIAL RESPONSE A-S6322 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416, TYE II, CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |