NSN 5305-01-056-3200 · NIIN 010563200 · FSC 5305
NO DASHES 5305010563200
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.542 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.312 AND INCHES MAXIMUM 1.344 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.929 AND INCHES MAXIMUM 1.024 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4982 AND INCHES MAXIMUM 0.4991 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.802 AND INCHES MAXIMUM 0.822 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |