NSN 5305-01-059-1954 · NIIN 010591954 · FSC 5305
NO DASHES 5305010591954
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.142 AND INCHES MAXIMUM 2.172 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.337 AND INCHES MAXIMUM 0.383 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.802 AND INCHES MAXIMUM 1.822 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 006557667. An older drawing citing one of those numbers resolves here.