NSN 5305-01-058-7064 · NIIN 010587064 · FSC 5305
NO DASHES 5305010587064
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.427 AND INCHES MAXIMUM 0.479 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.375 AND INCHES MAXIMUM 1.407 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.573 AND INCHES MAXIMUM 0.640 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3108 AND INCHES MAXIMUM 0.3117 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.948 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.116 AND INCHES MAXIMUM 1.136 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81205-BACB30AB |