NSN 5320-01-411-7950 · NIIN 014117950 · FSC 5320
NO DASHES 5320014117950
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.440 AND INCHES MAXIMUM 0.460 |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 3180 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 5380 |
| FEAT | SPECIAL FEATURES | NON-LUBED PINS MUST BE USED WITH LUBED COLLAR. |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5737 OR ASSN STD SINGLE MATERIAL RESPONSE A-S5731 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE HI-SHEAR SEC. 258, CAGE 73197 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 73197-HL48 |