NSN 5305-01-733-0468 · NIIN 017330468 · FSC 5305
NO DASHES 5305017330468
In Stock
SCREW,MACHINE
Screws
Application: KC-135 ACFT
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG REDUCED HEAD, "HI-TORQUE",SHORT THREAD,.0468 OVERSIZE |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.7381 AND INCHES MAXIMUM 0.8077 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | KC-135 ACFT |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 4130 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.2505 AND INCHES MAXIMUM 3.2805 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TYE II,CLASS 2 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.453 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.5000 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL STD/SPEC 1ST MATERIAL RESPONSE NAS498 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6758 |
| AAJD | THREAD CLASS | 3A |