NSN 5306-01-611-3532 · NIIN 016113532 · FSC 5306
NO DASHES 5306016113532
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: VARIOUS C5 918S
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.637 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.6250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.117 AND INCHES MAXIMUM 0.147 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 140000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HEX HEAD, SHORT THREAD, CLOSE TOL, ALLOY STEEL |
| FEAT | SPECIAL FEATURES | DRILLED SHANK |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S6415 OR ASSN STD 2ND MATERIAL RESPONSE A-S6484 OR ASSN STD 3RD MATERIAL RESPONSE A-S6322 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ-0416 TYE II CLASS 2 AND BS-F-69 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-BACB30NF10D132 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.754 AND INCHES MAXIMUM 0.784 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.327 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6240 |
| AGAV | END ITEM IDENTIFICATION | VARIOUS C5 918S |