NSN 5306-01-505-7665 · NIIN 015057665 · FSC 5306
NO DASHES 5306015057665
In Stock
BOLT,SHEAR
Bolts
Application: C-135 AIRCRAFT
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.759 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 5.169 AND INCHES MAXIMUM 5.199 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.453 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.239 AND INCHES MAXIMUM 1.252 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.8730 AND INCHES MAXIMUM 0.8740 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AGAV | END ITEM IDENTIFICATION | C-135 AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.8750 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 3.980 AND INCHES MAXIMUM 4.010 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.138 AND INCHES MAXIMUM 3.148 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,A286 CRES,SHORT THR |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5731 OR ASSN STD SINGLE MATERIAL RESPONSE A-S5737 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY2 CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |