NSN 5306-01-056-7252 · NIIN 010567252 · FSC 5306
NO DASHES 5306010567252
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.737 AND INCHES MAXIMUM 0.787 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 4.122 AND INCHES MAXIMUM 4.152 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.453 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.239 AND INCHES MAXIMUM 1.252 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.8730 AND INCHES MAXIMUM 0.8740 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.875 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 3.365 AND INCHES MAXIMUM 3.385 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 140000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.978 AND INCHES MAXIMUM 4.028 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |