NSN 5306-01-210-2915 · NIIN 012102915 · FSC 5306
NO DASHES 5306012102915
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.866 AND INCHES MAXIMUM 0.916 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 6.501 AND INCHES MAXIMUM 6.531 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.515 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.427 AND INCHES MAXIMUM 1.440 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.9980 AND INCHES MAXIMUM 0.9990 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.000 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 5.615 AND INCHES MAXIMUM 5.635 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 140000 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |