NSN 5306-01-206-7183 · NIIN 012067183 · FSC 5306
NO DASHES 5306012067183
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.669 AND INCHES MAXIMUM 0.719 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.491 AND INCHES MAXIMUM 1.521 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.234 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.690 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.4516 AND INCHES MAXIMUM 0.4526 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.802 AND INCHES MAXIMUM 0.822 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS6607 |
Supersedes
This item replaces cancelled NIIN 012113091. An older drawing citing one of those numbers resolves here.