NSN 5306-01-535-0449 · NIIN 015350449 · FSC 5306
NO DASHES 5306015350449
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: E-3A
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.605 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 5.090 AND INCHES MAXIMUM 5.120 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 4.490 AND INCHES MAXIMUM 4.510 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 4.934 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.877 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.5605 AND INCHES MAXIMUM 0.5615 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AGAV | END ITEM IDENTIFICATION | E-3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| AAJD | THREAD CLASS | 3A |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | 0.0156 OVERSIZE |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416 CL 2 TY 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.296 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |