NSN 5306-01-607-8081 · NIIN 016078081 · FSC 5306
NO DASHES 5306016078081
In Stock
BOLT,SHEAR
Bolts
Application: E-3 BLOCK 404
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3106 AND INCHES MAXIMUM 0.3120 |
| AGAV | END ITEM IDENTIFICATION | E-3 BLOCK 404 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3125 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.3025 AND INCHES MAXIMUM 0.3225 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE B-S 10-85,TYE 1,CLASS A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.7665 AND INCHES MAXIMUM 0.7965 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.171 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,HEX HEAD,160 KSI MIN TENSILE,LONG THREAD,6AL-4V TITANIUM,NON LOCKING AND SELF-LOCKING NOMINAL AND OVERSIZE |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE 6AL-4V TITANIU- ALLOY ER A-S4928 OR A-S4967 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |