NSN 5306-01-664-9769 · NIIN 016649769 · FSC 5306
NO DASHES 5306016649769
In Stock
BOLT,SHEAR
Bolts
Application: B1-BACFT
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES NOMINAL 0.970 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.672 AND INCHES MAXIMUM 0.687 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | INCHES MINIMUM 7.615 AND INCHES MAXIMUM 7.635 |
| ASXK | HOLE QUANTITY | 4 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| AGAV | END ITEM IDENTIFICATION | B1-BACFT |
| CSYM | SURFACE FINISH | ALL HOLES MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| BQDM | HOLE TYPE | DRILLED |
| HUES | COLOR | THREADS BLACK |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S 5662 OR 5962 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE B-S 10-85,TY 1,CL A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,12 POINT HEAD,220 KSI MIN TENSILE,125 KSI MIN SHEAR,NICKEL ALLOY 718(NOMINAL AND OVERSIZE) |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6226 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.775 AND INCHES MAXIMUM 0.797 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.160 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.6250 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81205-BACB30US |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.520 AND INCHES MAXIMUM 0.540 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 8.58 AND INCHES MAXIMUM 8.61 |
| CSYM | SURFACE FINISH | HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |