NSN 5306-01-712-8682 · NIIN 017128682 · FSC 5306
NO DASHES 5306017128682
In Stock
BOLT,SHEAR
Bolts
Application: KC-135 ACFT
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASR | HEAD INSIDE DIAMETER | INCHES MINIMUM 0.710 AND INCHES MAXIMUM 0.750 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.5386 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 7.5705 AND INCHES MAXIMUM 7.6005 |
| AASK | HEAD STYLE | |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| AGAV | END ITEM IDENTIFICATION | KC-135 ACFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.0000 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 6.0525 AND INCHES MAXIMUM 6.0825 |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CSYT | CHAMFER ANGLE | DEGREES MINIMUM 28.0 AND DEGREES MAXIMUM 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 12 POINT HEAD |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5962 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.790 AND INCHES MAXIMUM 0.810 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.064 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.200 AND INCHES MAXIMUM 1.229 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.212 AND INCHES MAXIMUM 0.232 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 1.0286 AND INCHES MAXIMUM 1.0292 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--416 TYE II, CLASS 2. |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION BACB30US |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |