ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-01-715-1583
NSN 5306-01-715-1583  ·  NIIN 017151583  ·  FSC 5306
NO DASHES 5306017151583
In Stock

BOLT,SHEAR

Bolts

Application: B-1 FLEET

Technical characteristics

25 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AASUHEAD HEIGHTINCHES MINIMUM 0.330 AND INCHES MAXIMUM 0.350
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTHINCHES NOMINAL 0.643
AASBFASTENER LENGTHINCHES MINIMUM 1.4405 AND INCHES MAXIMUM 1.4705
AASKHEAD STYLE
AHYMNOMINAL THREAD DIAMETERINCHES 0.375
ANEEGRIP LENGTHINCHES MINIMUM 0.8025 AND INCHES MAXIMUM 0.8225
CMLPTHREAD QUANTITY PER INCH24
CQBCMINIMUM TENSILE STRENGTHPOUNDS PER SQUARE INCH 220000
CSYMSURFACE FINISHOVERALL MICROINCHES 32.0
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYBOLT,12 POINT HEAD,220 KSI MIN TENSILE,125 KSI MIN SHEAR,NICKEL ALLOY 718 (NOMINAL AND OVERSIZE)
MATTMATERIALOVERALL NICKEL ALLOY 718
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONOVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S 5662 OR A-S 5962
PRPYPROPRIETARY CHARACTERISTICSPACS
SFTTSURFACE TREATMENTOVERALL PASSIVATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONOVERALL NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S 2700,-ETHOD 1,TYE 2 OR 8
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.437
AATCEXTENDED WASHER DIAMETERINCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.507
AATDEXTENDED WASHER THICKNESSINCHES MINIMUM 0.081 AND INCHES MAXIMUM 0.101
AAURGRIP DIAMETERINCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745
AAWUSINGLE SHEAR STRENGTHPOUNDS PER SQUARE INCH (PSI) 125000
AGAVEND ITEM IDENTIFICATIONB-1 FLEET
ZZZKSPECIFICATION/STANDARD DATAMANUFACTURERS STANDARD 81205-BACB30US
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)