NSN 5306-01-702-6886 · NIIN 017026886 · FSC 5306
NO DASHES 5306017026886
In Stock
BOLT,SHEAR
Bolts
Application: T7AREDHAWK
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3750 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.643 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.628 AND INCHES MAXIMUM 2.658 |
| AASK | HEAD STYLE | |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.99 AND INCHES MAXIMUM 2.01 |
| AGAV | END ITEM IDENTIFICATION | T7AREDHAWK |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 12 POINT HEAD, 220 KSI MIN TENSILE, 125 KSI MIN SHEAR, NICKEL ALLOY 718 (NOMINAL AND OVERSIZE) |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S5662 OR A-S5962 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81205-BACB30US |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.649 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.081 AND INCHES MAXIMUM 0.101 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 1, TYE 2 OR TYE 8 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 2.426 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.330 AND INCHES MAXIMUM 0.350 |