NSN 5320-01-644-5411 · NIIN 016445411 · FSC 5320
NO DASHES 5320016445411
In Stock
PIN-RIVET
Rivets
Application: V-22 AIRCRAFT
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED CETYL ALCOHOL AND SOLID FILM |
| AGAV | END ITEM IDENTIFICATION | V-22 AIRCRAFT |
| AAJD | THREAD CLASS | 3A |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.3266 AND INCHES MAXIMUM 0.3276 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.475 AND INCHES MAXIMUM 0.505 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE 6AI-4V TITANIU- ALLOY ER A-S 4928 OR A-S 4967 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.850 AND INCHES MAXIMUM 0.870 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.068 AND INCHES MAXIMUM 0.078 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE ALU-INU- IG-ENTED COATING ER B-S10-85, TYE I, CLASS A AND HOSHATE-FLUORIDE TREAT ER BAC5861 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| FEAT | SPECIAL FEATURES | LUBRICATION: CETYL ALCOHOL IAW WITH AS87132, TYPE I OR TYPE III, GRADE OPTIONAL AND SOLID FILM LUBE PER AS5272, TYPE I |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, PROYRUDING HEAD, HEX DRIVE, 95 KSI SHEAR |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |