NSN 5340-01-133-9612 · NIIN 011339612 · FSC 5340
NO DASHES 5340011339612
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OIL RESISTANT AND WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.690 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.061 AND INCHES MAXIMUM 0.067 |
| AHMM | LUG WIDTH | INCHES NOMINAL 1.874 |
| AKZC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.755 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.046 AND INCHES MAXIMUM 1.078 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.312 |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | INCHES MINIMUM 1.172 AND INCHES MAXIMUM 1.204 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.359 AND INCHES MAXIMUM 1.391 |
| BZTQ | LUG HOLE DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.209 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 T4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| STYL | STYLE DESIGNATOR |