NSN 5340-01-044-3506 · NIIN 010443506 · FSC 5340
NO DASHES 5340010443506
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.625 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.054 |
| AHMM | LUG WIDTH | INCHES NOMINAL 0.500 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.827 AND INCHES MAXIMUM 0.859 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.093 |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | INCHES MINIMUM 0.858 AND INCHES MAXIMUM 0.890 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.859 AND INCHES MAXIMUM 0.891 |
| BZTP | DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER | INCHES NOMINAL 0.250 |
| BZTQ | LUG HOLE DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.209 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION 81205-BACC10K |