NSN 5310-01-057-9353 · NIIN 010579353 · FSC 5310
NO DASHES 5310010579353
In Stock
NUT,SELF-LOCKING,ROUND
Nuts and Washers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | INCHES 2.3239 TO 2.3290 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ABPH | SMALL END DIAMETER | INCHES NOMINAL 2.750 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.127 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 3.141 AND INCHES MAXIMUM 3.156 |
| ADBG | NUT THICKNESS | INCHES MAXIMUM 0.594 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.260 |
| ADBJ | UNDERCUT THICKNESS | INCHES NOMINAL 0.141 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| BZRR | THREAD SERIES | UNS |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | INCHES 2.360 |
| MATT | MATERIAL | LOCKING INSERT PLASTIC |
| MATT | MATERIAL | NUT STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1213 OR STEEL COMP 1215 |
Supersedes
This item replaces cancelled NIIN 010529161. An older drawing citing one of those numbers resolves here.