NSN 5306-01-043-5722 · NIIN 010435722 · FSC 5306
NO DASHES 5306010435722
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.392 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.710 AND INCHES MAXIMUM 1.757 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.177 AND INCHES MAXIMUM 0.197 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3108 AND INCHES MAXIMUM 0.3117 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.081 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.591 AND INCHES MAXIMUM 1.623 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 85495-B-17020 |