NSN 5306-01-218-7521 · NIIN 012187521 · FSC 5306
NO DASHES 5306012187521
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.617 AND INCHES MAXIMUM 0.664 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.742 AND INCHES MAXIMUM 3.789 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.271 AND INCHES MAXIMUM 0.291 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4982 AND INCHES MAXIMUM 0.4991 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.111 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 3.125 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.543 AND INCHES MAXIMUM 3.575 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR CADMIUM OR CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST TREATMENT RESPONSE NAS672 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-8837,TY2,CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |